Difference between solar cable and normal cable

Photovoltaic cable is also a special photovoltaic cable, mainly used in photovoltaic power stations, with high temperature, cold, oil, acid and alkali resistance, anti-ultraviolet, flame-retardant environmental protection, long service life, etc.  Common models are PV1-F, H1Z2Z2-K.

PV cables are used in PV power systems to connect cables, such as parallel cables between groups and between groups to DC distribution boxes (bus boxes) , serial cables between PV modules and modules on DC side, cross-linking cables between modules and between modules and DC distribution boxes (bus boxes) and cables between DC distribution boxes and inverters, the utility model can also be applied to an AC application cable used for the connection between an inverter and a transmission network.

Slocable photovoltaic cable is made of stranded annealed tin-plated soft copper wire with conductor working temperature of 120 °C. The bending radius of the cable should be 6 times larger than the cable outer diameter. This product is a green halogen-free product. In case of fire accident, the quantity of poisonous and harmful gas and smoke is less.

The difference between photovoltaic cable and common cable

The following will explain the specific differences between ordinary and solar cables.

Photovoltaic cables

Conductor: copper conductor or tinned copper hundred conductor

Insulation: irradiance crosslinked polyolefin insulation

Sheath: irradiated cross-linked polyolefin insulation

Ordinary cable

Conductor: copper conductor or tinned copper conductor

Insulation: polyvinyl chloride or XLPE insulation

Sheath: polyvinyl chloride

Common cable from the above can be seen using the same conductor and photovoltaic cable.

Common cable insulation and sheath from the above can be seen different from photovoltaic cable.

The common cable is only suitable for laying in the common environment, but the photovoltaic cable is suitable for laying in the bad environment.